01. Intelligent & Connected Vehicles Technology
- 01 Development, Testing and Evaluation
- 02 Perception, HD Map and Position
- 03 Decision-making, Planning and Control
- 04 AI & AD
- 05 V2X Technology and Intelligent & Network Transportation
- 06 Cyber Security and Functional Safety
- 07 Smart Cockpit and Human-machine Interaction
- 08 ADAS
02. BEV/HEV/FCEV Technologies
- 01 Electric Vehicles
- 02 Hybrid Electric Vehicles
- 03 Fuel Cell Vehicles
- 04 Vehicle Control and Energy Management
- 05 Fuel Cell and Systems
- 06 Motor and E-Drive Technologies
- 07 Batteries and On-board Energy Storage
- 08 Charging Technology and Infrastructure
- 09 Fire Safety Technology of Electric Vehicles
- 10 Remote Monitoring and Operating Evaluation of EV
- 11 Thermal Management in EV
- 12 Recycling of Power Battery and Echelon Use
- 13 Battery Swapping Mode
03. Commercial Vehicle
- 01 New Technology of Commercial Vehicles (including New Energy Vehicles, Intelligent & Connected Vehicles, and Shared Vehicles)
- 02 Full Vehicle Technology of Commercial Vehicles (including Vehicle Dynamics, NVH, etc.)
- 03 Subsystem and Component Technology of Commercial Vehicles (including Powertrain and Transmission, etc.)
- 04 Electrics, Electronics and Control Technology of Commercial Vehicles
- 05 Vehicle Body Technology of Commercial Vehicles
- 06 Manufacturing Technology for Commercial Vehicles
04. Off-road、Flying and Specical Vehicle
- 01 Configuration Technology of Flying Vehicle
- 02 New Structured Vehicle Technology such as Multi-habitat and Cross-region
- 03 Special Environment Vehicle Technology such as Mine, Polar, Plateau
- 04 Closed Environment Vehicle Technology such as Campus and Airports
- 05 Special Function and Work Vehicle Technology
- 06 Total Design Technology(Off-road、Flying and Specical Vehicle)
- 07 High Trafficability Vehicle Technology(Off-road、Flying and Specical Vehicle)
- 08 High Mobility Propulsion Technology(Off-road、Flying and Specical Vehicle)
- 09 Intelligent Control, Scheduling and Operation Technology(Off-road、Flying and Specical Vehicle)
- 10 Platform-Work Interaction Dynamics and Control Technology(Off-road、Flying and Specical Vehicle)
- 11 Special Environment and Function Simulation, Testing and Evaluation Technology
05. Internal Combustion Engine, Lubrication
- 01 Advanced Diesel Engine Technology
- 02 Advanced Gasoline Engine Technology
- 03 Advanced Gaseous Fuel Engine Technology
- 04 Hydrogen/ Ammonia/ E-Fuels and their Engine Technology
- 05 Variable Valve Technology & Supercharging Technology
- 06 Hybrid Engine Technology (Range Extender& Hybrid Engine)
- 07 Fuel Injection and Sprays
- 08 Engine Design & Simulation
- 09 New Concept Internal Combustion Engines
- 10 Heat Transfer & Waste Heat Reutilization
- 11 Fuel and Lubrication (Low Carbon and Carbon Neutral Fuel / Low Viscosity Lubrication Technology)
- 12 Key Components of Internal Combustion Engine
- 13 Engine Electronic Control & Testing Technology
- 14 Zero Impact Emission Technology for Combustion Engine
06. Environment and Emission Control
- 01 In-cylinder Emission Control Technology of Internal Combustion Engine
- 02 Internal Combustion Engine Aftertreatment System and Emission Control
- 03 Clean Fuel Engine Emission Control Technology
- 04 Fuel Quality and Pollutant Control Technology
- 05 Vehicle Energy Consumption&Emission Model and Emission Inventory Technology
- 06 Brake and Tire Wear Particulate Emission Control
- 07 Digital Testing and Evaluation Technology for Automobile Emissions and Energy Consumption
- 08 Vehicle Interior Air and VOC Test and Control
- 09 Evaporative Pollutant Emission Control of Non-Fuel System
- 10 Emissions Test and Evaluation Technology for Hybrid Vehicle
- 11 OBD and Environment Protection Consistency Technology
- 12 Emission Standards and International Regulations Study
07. Vehicle Dynamics and Systems Integration
- 01 Development, Evaluation, and Validation Technology of Steering System
- 02 Modeling, Simulation, and Test of Steering System
- 03 Dynamics Control of Intelligent Vehicle
- 04 Development, Evaluation, and Validation Technology of Braking System
- 05 Modeling, Simulation, and Test of Braking System
- 06 Development, Evaluation and Validation Technology of Suspension
- 07 Modeling, Simulation, Test and Evaluation of Suspension
- 08 Performance Development, Evaluation, Verification and Adjustment Technology of Vehicle Dynamics
- 09 Modeling, Simulation and Test of Vehicle Dynamics
- 10 Strategy, Calibration and Validation of Vehicle Dynamics Control
08. Noise, Vibration & Harshness (NVH)
- 01 Vehicle Vibration & Noise Control
- 02 Active Control Technology of Noise & Vibration
- 03 Vibration & Noise Testing Technology
- 04 Sound Package Design& Development Technology
- 05 Air Intake System & Exhaust System Vibration & Noise Control
- 06 Vibration Isolation Technology & Control
- 07 Wind Noise Control Technology
- 08 Chassis Vibration & Noise Control
- 09 Transmission Vibration & Noise Control
- 10 Body Vibration & Noise Control
- 11 Road Noise Control Technology
- 12 Air Condition Vibration & Noise Testing Technology
- 13 BSR Evaluation & Control
- 14 In-vehicle Active Sound Generation Design and Optimization Technology
- 15 Noise and Vibration Control of Power System
09. Product and Performance Technology
- 01 Product Design and Development Technology
- 02 Vehicle Performance Development Technology
- 03 Digital Development Technology
- 04 Vehicle Calibration Technology
- 05 Key Technology for Healthy Ecology (in-vehicle air quality & prohibited substance)
10. Automotive Aerodynamics
- 01 Vehicle Aerodynamic Performance Development
- 02 Vehicle Thermal Management Control and Development
- 03 Wind Noise Performance Development
- 04 Water Management Technology
- 05 Shape and Aerodynamic Optimization Design
- 06 Automobile Wind Tunnel Testing Technology
- 07 CFD Simulation Technology for Automobile
- 08 Aerodynamic Performance Development for Auto Racing
- 09 Intelligent Simulation and Optimization Technology of Low Wind Drag Vehicle
- 10 Digital Wind Tunnel Development Technology
11. Automotive Thermal System
- 01 Thermal System Architecture and Performance
- 02 Design for Heat Pump and the Componet of Automotive Thermal System
- 03 Automotive Thermal Environment and Comfort Evaluation
- 04 Alternative Technologies for Environment Friendly Refrigerent
- 05 Control, Calibration and Validation for Thermal System(Automotive Thermal System)
- 06 Modeling, Simulation and Testing Methods(Automotive Thermal System)
- 07 Thermal Behavior and Temperature Control of Battery
- 08 Thermal Management of Motor and Control
12. Automotive Reliability Technology
- 01 Virtual Roving Ground Technology
- 02 Vehicle Reliability Test and Evaluation
- 03 Vehicle Reliability Design
- 04 Vehicle Reliability Manufacturing
- 05 Vehicle reliability Management
- 06 Vehicle Reliability Simulation and Analysis
- 07 User Association Technology of Automobile Reliability
13. Advanced Transmission System and Driveline
- 01 Powertrain and Drive Technology for HEV/PHEV/EV
- 02 Innovative Design for Driveline Assembly and Components
- 03 Developing and Testing Technology of Transmission System and Driveline
- 04 Intelligent Control and Energy Management of HEV/PHEV/EV
14. Vehicle Electronics Control Technologies
- 01 Vehicle Control Technology
- 02 Vehicle Electronic and Electrical Architecture
- 03 New Electronic Components Used By Typical Application
- 04 Software & Hardware Development
- 05 Vehicle Sensor & Actuator
- 06 Platform and Modular Design Approach
- 07 Control Strategy
- 08 Multi-Media/Infotainment System
- 09 Powertrain/Chassis/Body Electronic Control
- 10 The Idea of Electronic Products Industry
- 11 Electrical & Electronic System Design Methods
- 12 Control Scheme of Electronic Control System
- 13 Electromagnetic Compatibility (EMC)
- 14 Technology and Application of In-Vehicle Ethernet
- 15 Electronic Control Post-sale Diagnosis Technology and Software Air Upgrade(OTA, etc.)
- 16 Information Security Strategy of Vehicle Network After Vehicle to Vehicle and Access to the Internet Network
- 17 The Concept and Scheme of Domain Controller to Meet the Future Electronic and Electrical Architecture
15. Advanced Car Body Design
- 01 Lightweight Body Structure and Manufacturing Process of New Energy Vehicles
- 02 Body CAD/CAE/CAM/CFD Analysis and Optimization
- 03 Advanced Body Material Molding and Joining Technology and Equipment
16. Lightweight Technologies
- 01 "Lightweight Design. Includes topology optimization of isotropic and anisotropic material parts and components, linear and non-linear topology optimization; size optimization, topography optimization, multi-objective and multi-disciplinary optimizatio
- 02 Lightweight Molding and Joining Technology. Includes joining technology of dissimilar and same material parts and components, fiber reinforced composites molding, high-strength steel, light alloy and engineering plastics molding technology
- 03 Lightweight Material. Includes the application of high-strength steel, aluminium alloy, magnesium alloy, engineering plastics and fiber reinforced composites in automobile and performance control technology
17. New Materials
- 01 Advanced Battery Material
- 02 Advanced Surface Treatment Material
- 03 Plastic Material
- 04 Rubber Material
- 05 Sealing Material
- 06 Composite Material
- 07 Fabric and Leather Material
- 08 High Performance Adhesive
- 09 Corrosion-resistant Materia
- 10 Advanced Non-metal Technology
18. Advanced Vehicle Manufacturing Technologies
- 01 Stamping Technology & Thermoforming Technology
- 02 Casting, Forging and Molding Technology
- 03 Mold Technology
- 04 Joining Technology
- 05 Vehicle Assembly Technology
- 06 Machining Technology of Powertrain Parts
- 07 Powertrain Assembly Technology
- 08 Testing and Measuring Technology
- 09 Digital and Intelligent Manufacturing
- 10 Composite Molding Technology
- 11 Management Technology of Advanced Manufacturing Process
- 12 Painting Technology
- 13 Typical Corrosion and Environment of Automobile
- 14 Anticorrosion Material Selection and Design
- 15 Electroplating, Coating, Phosphating, Oxidation and other Surface Treatment Technologies
- 16 Antirust Grease, Packaging, Storage, Transportation, Maintenance and other Technologies
- 17 Corrosion Testing and Evaluation
- 18 Typical Aging and Environment of Automobile
- 19 Anti Aging Material Selection and Design
- 20 Aging Testing and Evaluation
- 21 Fastening Joint and Design
- 22 Fastener Technology and Manufacturing
- 23 Fastener Assembling and Anti-loosening
- 24 Fastener Validation and Failure
- 25 New Energy Power System Manufacturing Technology
19. Engineering Construction and Equipment
- 01 Application and Practice of Intelligent Manufacturing
- 02 Digital Factory
- 03 Intelligent Equipment Technology and Application
- 04 Factory Design and Construction
- 05 Robot and Automatic Control
20. Automotive Safety Technologies
- 01 Safety of Intelligent Vehicles
- 02 Crashworthiness and Lightweight Technology
- 03 Injury Biomechanics
- 04 Safety Protection of Road Users
- 05 Safety Technology of NEV
- 06 In-depth Analysis of Traffic Accident
- 07 Safety Standards, Testing and Evaluation
21. Automotive Simulation and Testing
- 01 Simulation and Testing Technology & Equipment of Vehicles and Vehicles Components
- 02 Simulation and Experimental Validation
- 03 CAD/CAE/CAM/CFD Analysis and Optimization
22. Technical Management
- 01 Industry Development Strategy
- 02 Policies, Regulations and Standards
- 03 Talent Training and Incentive Mechanism
- 04 Automotive Supply Chain
- 05 New Industrial Ecology and Cross-industry Integrity
- 06 Product and Market Trends
- 07 R&D Methodology
- 08 Product Development System and Process
- 09 Methods for Technology Assessment and Selection
- 10 Product Design Methodology
- 11 Innovate Business Model
- 12 Explore Mobility Serve
23. Formula Student China Technical Papers
- 01 FSC Engine System
- 02 FSC EIC System
- 03 FSC Chassis
- 04 FSC Manufacturing Process
- 05 FSC Fluid Dynamics Analysis
- 06 FSC Strategy and Control of Autonomous System
- 07 FSC Team Management
- 08 FSC Other Topics